View Full Version : Bicycle Mechanics
- BB30 or GXP
- Question on Tools
- what tools for this BB?
- 700c instead of 27?
- Rear Wheel Alignment and Front Brake Adjustment
- Easy workaround to keep chain on a single front ring?
- 28mm tires on Shimano WH wheelsets - is it possible
- Noisy Cassette and Drivetrain
- 1x10 Conversion - question on wear.
- First Successful Stan's Refill
- Will I have fitting issues with these two items?
- Mix and Match chainrings?
- Manufacturer "Play" in Upper Jockey Wheel Bushing
- 60s Schwinn Tire Mounting
- Cotton bartape over gel pads doable?
- Vintage Swiss Cilo mixte bicycle restoration - bottom bracket & crank issues
- Chain rubbing on front derailler when on high rear gear
- that age old question: clockwise or counter clockwise BB?
- Very unusual derailleur setup
- B-Tension, Large Gap Between Pulley and Cog
- Old MTB - broken spoke - replace, replace all, or new wheel for touring?
- SRAM Attack/Shimano XT
- Problems with polarized Sunglasses?
- Crossing spokes
- Integrity of a Bent Dropout
- 700c to 26" conversion
- Specialized Tarmac SL4 and Quarq Elsa
- Stop that damn squeak!
- Pinarello BB adaptor. Where to buy? Any Experiences with?
- Breezer Finesse Death Wobble
- Home made, heavy-duty work stand ideas needed!!
- No more power from Sanyo dynohub
- Canti to V brake conversion problem.....
- loud-ish hub has become quiet ?
- Lubing an old Shimano 333
- 7 speed HG on a 6 speed UG hub
- Chain Line on Shimano Ultegra CS6500 9-speed cassette
- Tire wobble. Why,?
- Chain length (50-34 x 11-34 x SGS rd)
- What snap ring pliers does this require?
- Servicing the Nexus-3
- DT Clamp On Shifter to Bar End Conversion
- Ream 0.1mm from 1.5mm wall of ally seat tube?
- downtube shift boss fully round... compatibility?
- Anybody have a dead SRAM RED BB?
- Question on dnp 7spd free wheel hub 11-32t
- Back wheel out of line
- Brake pads gone after 600 miles?
- Changing from an 11-25 to 11-28
- Rim appears to have a cut through it, is this ok or is the rim broken?
- Shimano 6701 or 5700 chain?
- Replacing cassette - what kind do I need?
- Fixing Tektro Disc Brakes
- trick for feeding housing through internally cabled handlebars?
- Please Educate me on Tires
- Crank arms, spacers, BB oh my!
- Tacx Replacement jockey wheels and float
- replacement brake pads , 1971 Raleigh Sports
- How do I take this Freewheel Off?
- 3 speed hubs
- Something odd happened to my rear derailleur
- How to loosen Shimano 600 brake levers (non-aero)?
- bottom bracket
- Aero spokes on 32h wheels - overkill or worthwhile?
- Mounting paris-roubaix tire to old araya rim
- Mesa Runner Derailleur 1985
- Does it matter how evenly cut my steerer tube is?
- click click from where ?
- I can't inflate my bike tire.
- Installing Rotors on Velocity Dyad Wheels
- Crank arm covers ?
- trueing tubular track wheels on tire rather rim?
- Help, I'm seeking brakes to fit a fork with narrow 55mm wide cantilever post centers.
- Triple Chainring - Shifting Up Skips Middle Ring
- 294mm or 296mm spokes for 36h Open Pros w/ Campagnolo Record Hubs- 3 Cross
- Schrader & Presta hybrid pump Q
- Where to find hard to get(yet not uncommon) parts
- Re-dishing wheel on 700c conversion
- Bubbling Carbon Fiber Repair Questions
- Low lead valve?
- Shimano BR-AT50 cantis
- Hex bit sockets - Snap-On, SK, or Wiha?
- KMC chain pins for too short chain?
- Grub Seals?
- Small 'tac' sound while pedaling
- Shimano Sora RD-3400 SS on 29T cog
- Damaged/Twisted mountain bike suspension forks
- Rear Derailleur adjustment but no barrel adjuster
- camnpy 9 speed shifters
- is this a good floor pump?
- Broken spoke and bent rear axle on MTB second time in a month
- Shortening Mushroom Pinned Chain - KMC Kool Chain
- new repair stand
- Older steel frame, special shifter ferrule needed?
- Replaced rim - now I can't pump up the tyre fully without the bead popping out
- Gipiemme dustcap removal (hubs)
- Headset compatibility
- Solid rubber/non-pneumatic inner tubes - What did I learn....
- Bullhorn Diameters?
- Wheel building - I've signed up for the class - what do I do now?