- cable to use for Shimano RX100. SP41?
- Is it a bad idea to take my brakes apart to clean them?
- Tektro brake issue / or brake pad issue
- Uniglide 6 > Hyperglide 7
- Tips for making a too-small bike more comfortable?
- What is this bike part?
- ISO 5775 Tire section width
- 8 Speed Suntour SL
- Spread Chain Stays?
- double to triple, new bb?
- "Ding" noise up front
- Chain line with new 8/9sp cogs
- Rebuiling bike, want to go from octalink v1 to external. Is threading the same?
- Paint Removal
- Odd tube failure mode
- SRAM Omnium
- Geriatric cyclist needs help refitting rear der.
- New Crank Set
- Drivetrain changes on a Surly Cross Check
- Shimano chainrings- A and B...?
- 8 Speed 9 speed Dura Ace
- Which dust mask for cutting carbon fiber?
- Clicking sound in the middle of Sram 11-28
- SRAM shifters work with Shimano drivetrain ??
- NSJ +ISO= disaster?
- How to make tektro brake caliper closer to rim?
- Rim Brake Wear - Please Recommend A Long Lasting Rim
- Ultegra 6500 Compatibility
- Pedal crank came loose...
- Top tube is creaking
- bar end shifter and deore lx triple
- Who makes the thinnest rim tape for clinchers?
- chain grinding on inner cage plate of front derailleur
- Cable cutting into Frame
- another chain line problem
- Chain having trouble going from 5th up to 4th cog
- Mr Whirly Cranks...heads up
- do hollowpin chains require a special chain tool?
- Partly-seized gear-cable
- Tap MyFrench Bottom Bracket
- How do you tell "out of true" from "bent"?
- Thank goodness that worked
- Problem with chain tensioner?
- Shimano Dura-Ace BB tool 6 notch
- parts for Sachs Torpedo Dreigang
- Removing sand in shifters
- Gears shifting randomly....
- component questions
- Dropping chain while shifting
- quick campy question (10spd ergos w/ 9spd cassette)
- sram gxp chainline adjustment...spacers?
- Saddle made a Creaking Noise?
- Infinity vortex Stem selection help
- Post a photo of Your Bike Mechanic
- brake housing for firction shift cable?
- Do I need ferrules?
- "n" branded spokes defective?
- Gear Cable Replacement on LX Rapid fire Shifter
- Dura Ace 7800 Triple Bar-End Question
- Nasty autoshifts under load
- How to center an old caliper road brake?
- Chain length set up - rather slightly short or slighty long?
- Headset adjustment questions
- Advice please re replacing axle and repacking bearings on freewheel hub.
- FD Clamp -- better to go a little big or a little small?
- Chainring-is it worn out?
- Shimano 9spd brifters...wtf?
- HELP: Dent in Top Tube
- Hed Ardennes wheels. creaking
- Another Damned Idiot Question
- newb question about changing tire sizes
- Problems patching 20-28mm tubes?
- Can I convert Campy 10 speed to Campy 9-speed?
- Why don't you grease a carbon seat post?
- Have I diagnosed this flat correctly?
- all aluminum 1" threadless fork
- Dropout Angle
- 8 distinct clicks = 9 speed shifters?
- Please help identify XT crank set
- chain scrapes deraiulleur?
- Crank slippage problem? (New Schwinn Cutter)
- Is it ok to have space between stem and steering tube
- Brake stud removal tips?
- How to inflate Presta Valves
- need 9" wide Ashtabula crank
- Damn idiot question
- Holy crap!!
- Advice on building Nexus Inter7 wheel for San Jose
- Fitting a 58cm frame under a 5'3" girl-- Ideas?
- Front End wobble
- Stuck derail. adju barrel in carbon frame
- Bottom Bracket help needed
- BB threading on a Gary Fisher
- Tektro R538 clearance
- Steer tube
- rim size for winter tires
- Stem and Spacer Question
- SRAM MasterLinks won't open?
- Respace a Shimano hub from 135mm to 130mm?
- Spacing issue: 120 mm hub on 130 mm frame