- clean, white bar tape
- Chain is hitting the front derailleur + Shifting issue.
- Rear derailleur question
- aluminum pipes as handlebars
- adjusting the cable tension on a 105 shifter on the front
- Need HELP with front road hub replacement.
- Dent on the downtube, need advisory.
- Brifter Mounting on Drop Bars; What's Your Preference?
- bicycle wheel approx 1.5 size diameter of 28 inch wheel?
- Problems with Cable Routing
- 7900 Bottom bracket ceramic upgrade problems
- Need help chossing my chainring: headache... borred... do not understand much
- Rigid Fork for 2002 Trek 4300
- Cable cutting and attention to detail
- Cable choices
- different type of clinchers?
- Trek 4300 chain rings
- SRAM i-9 bearing play
- SRAM 971 chain grinding/clunking connector link on Shimano HG770 9-speed cassette
- Dura Ace 7800 rear hub cassette spacer
- Kevlar tires
- Bicycle Maintenance and Repair Book
- Campy Record 10s rear derailleur: too much play
- Workstand clamps and aero seatpost?
- Maintenance schedule?
- Carbon post stuck in frame
- Can carbon rim braking surfaces be re-surfaced?
- cotter press availability
- Are disc specific rims a requirement?
- Front Fork Offset difference 44 vs 51, is that too big a difference
- Will a standard Campy RD work properly with this setup?
- Attach STI to handlebars
- How to properly shift gears?
- campy gran sport bottom bracket question
- What is this thing?
- Not shifting???
- any problems using 9/10 speed chainrings with 7/8 speed chain?
- Old Raleigh seatpost size
- What exactly are AR components?
- What hub? 135mm wide, 36 spoke, 10 speed Shimano Ultegra cassette
- dent in headtube lip -- fixable?
- Good Prices for Spokes.
- Chain Question from an Idiot (Me)
- Speedplay pedal/cleat wear
- steel frame recycling
- ksyrium SLs incompatible with Cervelo S3 09?
- cassette problems at -25f
- How tight to make trainer?
- Ksyrium SL with shimano - convert to Campagnolo? Need help!!
- Anyone know where I can get regina valve tubes?
- converting ball bearings to sealed bearings?
- Cracked?
- Rotate Spindles?
- 9 Speed Dura Ace (7700) Shifter Sticks after rebuild
- Thinking of building my own spoke tension guage!
- Carbon steerers and crown races
- Advantages of a Curved Top Tube?
- shifters
- Squeaky sound in the front of my bike
- Tips for CF Build?
- What speed is this hub?
- Bent Rear Derailleur Hangar
- Suntour Sprint 9000 chain wrap and cog sizes....
- how NOT to remove a stuck seatpost
- Internal ger hub on steamroller
- Pin pointing an issue with quill stems
- What type of bench vise for cycle repairs?
- Index shifting questions
- Bottle Cage Washer Question
- are seatpost sizes standard fro different tubing?
- Index shifting questions
- Removing Chrome
- Ultegra 6700 STI - must you only use 6700 brake calipers?
- Spindle-Only for Campy Veloce Crank?
- BB30 Bottom Bracket Shells
- Bullmoose handlebar/stem combo replacment
- That Darn Noise
- Fulcrum Hub body on Campy Protons?
- Make Old Chains Look (& act) New
- I wanna switch from 27x1/8" tires to 700's
- ooops!!
- Re-Dish after PowerTap conversion from Shimano to Campy?
- Fixing a flat with the spit in your mouth
- Removing Missing Link on KMC Chains
- Is my star nut out of alignment?
- 5 spd freewheel to 8 spd cassette
- Installing 130mm road hubs on a steel 135mm frame.
- quality of sunrace freewheels
- not sure what chain to get
- Rusted hole in fork
- Skinny saddle bag
- 4x 32H wheel lacing
- Shimano 12-25 and 11-23 Compatibility
- What tool do I need for this BB?
- Busted a spoke ... new riding habit the cause?
- A New Level of Lazy
- IGH hub dip oil?
- How often do you service your wheelset?
- SRAM 2010 question
- I don't know what it is with me and shifters!!