View Full Version : Bicycle Mechanics
- Tire inflated but...there's no valve.
- Vintage Campy hub race replacement?
- ReChroming my front fork on vintage Klein MLB- help
- Claris RD problems
- Shimano 6500 9 speed ultegra STI washer issue
- Will this new threadless fork have a long enough steerer tube?
- Thanks for the Indirect assistance!!!
- Compatible Tire Sizes for 700cx40
- Anything bad about Tiagra 4600 hubs? Can the front handle radial lacing?
- creaking sram dual drive internal hub
- Replacement for MAFAC "Racer" pads / holders?
- Replaced chain, now skipping
- HELP!! Crankset won't come off!
- What size are bmx mid bottom brackets?
- Tektro lever return spring...arrhhh.
- Just For A Chuckle
- Bike parts need a colour change - best + easiest way?
- Is Deore LX replacement chain ok for Mountain LX derailluer ?
- Replacing a chain
- Front cantilever brake cable breaks at anchor
- Friction: 8 Speed Chain + Cassette with 11-Speed Derailleurs
- crc freeze off
- Question about brake levers
- Fuji Altamira headset
- old Campy brake pad change
- ISO crank on JIS taper BB
- Solid Axle Bearing Adjustment
- Rear Wheel Rubbing off paint on side of Frame, Repair stand/Truing stand Questions
- Is my bike too small?
- Cassette/ R-Derailleur change technical question
- Hyperglide-c freehub with larger small cog?
- Need Help Measuring Road Bars
- Brake adjustment
- Campy and Shimano cassetets
- Creeking sound from BB (or cranks?)
- 10 speed to 11 speed hub
- Changing from bar end shifters to brifters
- Your opinion on the (dis)advantaged of belt drive on a Nexus -3
- Seatpost Fitting
- campagnolo athena shifter problem
- From 11-34T 9-speed cassette to 12-30T 10-speed cassette
- Want a smaller granny on Tiagra Crank
- ulterga 11 speed cassette with the 10 speed 105 shifters
- I Need a Wheel Builder in W. Palm Beach, FL
- Wheel truing dial indicator question
- can I use a 18 speed front derailer on an 21 speed mountain bike
- Is my chainring already bad?
- hozan or var fixed cup tool?
- Upjetting? Need help!
- New to the site, but in dire need of a motorbike expert to help me.
- New Sturmey C50 five-speed
- I replaced my shimano rear deraileur and had a problem...
- CX cantlever problem, need help!
- Catastrophic Seatpost Failure. How to remove carbon post stuck in the bike?
- How to Downshift and how to fix shifters not springing back?
- How to remove small spots of rust
- Puncture repair - traditional (rubber cement) or self-adhesive?
- So I'm going to cut my carbon steerer 0.5mm below the top of the clamp.
- Valve extenders who makes one with threaded exterior?
- Deore 10 speed front/left trigger shifter compatibility with older front derailleurs
- Removing bottom bracket from Schwinn Super Le tour 12.2
- BB30 or GXP
- Question on Tools
- what tools for this BB?
- 700c instead of 27?
- Rear Wheel Alignment and Front Brake Adjustment
- Easy workaround to keep chain on a single front ring?
- 28mm tires on Shimano WH wheelsets - is it possible
- Noisy Cassette and Drivetrain
- 1x10 Conversion - question on wear.
- First Successful Stan's Refill
- Will I have fitting issues with these two items?
- Mix and Match chainrings?
- Manufacturer "Play" in Upper Jockey Wheel Bushing
- 60s Schwinn Tire Mounting
- Cotton bartape over gel pads doable?
- Vintage Swiss Cilo mixte bicycle restoration - bottom bracket & crank issues
- Chain rubbing on front derailler when on high rear gear
- that age old question: clockwise or counter clockwise BB?
- Very unusual derailleur setup
- B-Tension, Large Gap Between Pulley and Cog
- Old MTB - broken spoke - replace, replace all, or new wheel for touring?
- SRAM Attack/Shimano XT
- Problems with polarized Sunglasses?
- Crossing spokes
- Integrity of a Bent Dropout
- 700c to 26" conversion
- Specialized Tarmac SL4 and Quarq Elsa
- Stop that damn squeak!
- Pinarello BB adaptor. Where to buy? Any Experiences with?
- Breezer Finesse Death Wobble
- Home made, heavy-duty work stand ideas needed!!
- No more power from Sanyo dynohub
- Canti to V brake conversion problem.....
- loud-ish hub has become quiet ?
- Lubing an old Shimano 333
- 7 speed HG on a 6 speed UG hub
- Chain Line on Shimano Ultegra CS6500 9-speed cassette
- Tire wobble. Why,?
- Chain length (50-34 x 11-34 x SGS rd)