View Full Version : Bicycle Mechanics
- Does this tension pulley need replaced?
- derailleur/brake cables and housing?
- Fork Preload and Sag
- Double chainrings on a triple
- remove crankset...
- Vinyl over CF?
- What year Campy cranks?
- Switchfrom 12-25t to a 11-27t
- Will an "8-speed" SRAM Power Link work...
- Front Fork/Wheel Replacement?
- Colnago dropout material?
- replace Phillips head screws with Allen...
- bent derailler?
- wheel building and spoke selection
- thoughts on Park Tool School?
- Help! Derailleur problem.
- maximum stem extension line
- powder coating
- Tweeking the Old Ten Speed
- Paint question - mix types?
- Crank wrench for Campagnolo
- What size spokes?
- Removing paint
- Will these chainrings work?
- loose headset emergency!
- Missing spoke and safety
- 128mm wheel spacing, changing wheel
- Stems, spacers, and threadless headset tolerances
- maximum weight for a bike
- Is this where i should lube?
- Destroyed Chain - 700 Miles
- The case for a standard group.
- Just primer and clearcoat?
- Chain compatibility - 5 speed
- Ritchey seatpost won't hold saddle level.
- Help identiify Shimano narrow chain
- Old carbon vs. New
- Unexplained Creaking Bicycle
- Badge removal techniques?
- Tell me about my Frame Damage!
- New bars, need new stem 1 1/8 31.8 brushed silver ideas?
- exposed fabric around tire bead...
- Derailleur cable length for bar-end shifters
- Replacing Pins Every Time You Break a Chain?
- handlebar stem rise/fall difference ?
- UN-indexing a shifter???
- Stripped my crankarm threads!
- What tools do you need to change a crankset/chainrings?
- What tools do you need to change a crankset/chainrings?
- What tools do you need to change a crankset/chainrings?
- 1st Wheelbuild, Your opinion highly appreciated
- Spokes on Wrong side of rim
- Headlight chaos
- Need help finding brake post/stud!
- Transplanting a Seatpost Head
- can i apply finshline teflon to threads?
- Lubing deraileurs?
- sounds annoying sounds
- conflict with LBS!!!!!
- Safety nubs: Yes or no??
- Replacing Sora derailleurs with 105?
- Wheels Manufacturing or American Classic or Mavic M10
- Chain care questions
- carbon fork
- Questins about headsets
- Replacement bb, axle length correct, was a double -can be triple?
- Removing an Easton compression plug...
- Swap front derailleur clamp?
- Upgrading old wheelset on 10/15 speed bike
- stripped some threads in a brake lever...
- Why not *just* clear powder coat?
- Your opinion on my wheel/rim dilemma.
- Rear mudguard/fender clearance issues
- need help with disc brakes please
- bike parts
- Preparing a road bike for winter storage
- Old friction derailleurs with modern 8, 9, or 10 speed cassettes
- Help me lace up by Brooks saddle
- Ultimate home pump?
- foam road grips
- reynolds 531....
- wheel size
- 2 annoying sounds--Help!
- Replacement pads for LX canti cartridges?
- A few fork(ing) questions
- Double Crank, Triple Shifter
- Self-Extracting Crank Bolts?
- FSA SLK MegaEXO Installation Problem
- List of old good bikes to own/work on?
- Shortening cranks: worth it?
- My cassette seems to wobble a bit...
- Switching Record crank arms. Thing to be careful about
- second layer of cork tape?
- Looking for Motobecane Decals
- Badly creaking Deda Black Tail carbon seat-stays
- BB Drain Hole And Hollowtech II BB- Will This Be A Problem?
- Rear wheel for a heavy rider.
- A series of unexplained flats
- Bunk Pumps or Am I Doing Something Wrong?
- DC power supply schematic, is this an okay project for a newb with a sodlering iron?