- Difference between ramped and non-ramped chain rings
- Shifting problem
- Spacing The Frame
- 105 front hub bearings
- Need Help
- Upgrade from 5 to 9 speed cassette
- Pilot C fork to stiff
- Installing a sound system to bike?
- refurbishing 1987 bianchi strada
- removing valve for tubeless mavic wheelset
- Cranks and Pedals
- 1974 Raleigh Sprite rear deraillure problem
- pipe
- What lube inside air pump?
- Reasonable price for drive-train change...
- Dumb question about installing BB
- Bottom Bracket Spindle Length
- is there really a diff between girls and boys bikes?
- Any opinions on Sapim spokes?
- Anybody else have a db4LW computer that resets wheelsize automatically?
- Lubing threadless headset
- Shimano 10s chain alternatives?
- Why Different Brake Cable Routing Systems?
- Using Polar HRM with a Mac
- Cutting the steerertube.
- Flight Deck not displaying gear indicator
- Campy 8 speed with 7 speed compatibility
- Should i change this frame?
- 6 speed cassette adapter?
- Help! headset removal/problems
- Replacing (installing) A Front Suspension Fork
- Lower rear derailer pulley catching on chain side plate?
- Kickstands/Fenders
- Bulk handlebar wrap/tape
- Upgrade plan from friction to indexed - will this work?
- newbie question about rust
- What is a Breezer Style Dropout?
- shifting touble
- Perenially loose cottered crank
- Hussefelt ISIS Drive Cranksets
- Fork question
- Pedal Problem?
- Shimano or Campy...how do you tell?
- replacing brake pads/cartridge shoes
- Replacing my fork
- query for installing ergo brake levers
- Tire replacement
- Changing Crank
- frog levers i cant get them to work again after losening
- Clunk with every pedal revolution
- Advice on a wheelset
- Rear derailleur for a wide range freewheel
- Schwinn headset removal
- stripping down a schwinn continental
- Please explain to the Newbie how to fix the shifter :)
- top tube routing for bar end shifters
- the joy of se...
- Can I get new brake cable guides welded on somewhere?
- Can You Mix MTB & Road Shimano Groups?
- Brass vs. Al nipples
- Clipless pedals -- can't get proper tension
- Pedal - wheel interference
- e.thirteen?
- Campy 9 speed woes
- 18 gears
- Removing solid-tube tires
- 83 or 85 mm BB
- How would i go about rebuilding a pedal
- Chainring add-ons to 8-Speed?
- Too much bearing grease?
- Shock Absorber
- Do I need a new derailleur?
- What automotive greese should I use on my bike?
- What is correct angle of the handle bars?
- Help - Problems with Rocky Mountain Switch - Front Mech
- No chain stretch after 2,500 - replace anyway?
- Expectations...
- Fork Maintenance
- Checking my fit to bike before cutting steering tube
- Converting to a fixie
- What's the advantage of presta valves?
- semi-metallic vs sintered brake pads
- 97 Norco Java vs. 05 Norco Bushpilot
- Name of a tool...
- Brakes clamp unevenly
- Specialized wireless computer intermittent.
- Headset keeps going loose
- Rake and geometry question...Cannondale
- High pressure slicks on aluminum MTB frame: greater frame fatigue?
- tightening cables on old-school centerpulls
- Cantilever brake quick release?
- Stem manufacturer?
- Upper pulley rubbing against largest sprocket
- When should I expect the chain and derailuer to touch/make noice if properly set up?
- rim tape- electric?
- ErgoPower wear/failure
- recommended tool kits?
- difference between the 7 or 8 speed rear der guide pulley and the 9 speed?
- Do I need to change front derraileur if going from 52-42-30 to 53-39 (10spd)
- toe clips....again