View Full Version : Bicycle Mechanics
- Older steel frame question
- Arghhh! Can't remove my 1986 Bridgestone MB-1's Nitto stem
- Internal anti-rust protection
- how do I know which cones to get?
- Chain ring orientation?
- Replace chain...and cassette...or do nothing?
- Converting old 7-speed to brifters
- Sram rival FD woes.
- Install a K-Edge without moving the front DR ???
- torque wrench
- Converting Aerospoke Wheel from threaded hub to cassette - possible?
- :tandem: Tandem cycling, fishtail, visually impaired (no idea what to title this...)
- Newbie: Crankarm/Set
- Brakes mounted for upright pard of road bike.
- Another Campagnolo Shimano compatibilty question.
- My LBS doesn't appear to use a torque wrench
- Shimano SPD SL 105 pedals
- Generic Torque Guide?
- What is the Quality level of Shimano wheel hubs?
- Derailleur pulley break in?
- Alloy Rim : Brakes : Thickness : Wear : Life?
- Rim selection... weight or aerodynamics (Kinlin XR-380, XR-300 or XR-270)?
- B-screw misaligned w/ dropout tab
- jpwoz
- shifters crankset and rear derailleur
- New shimano chain?
- Shimano Ultegra Triple FD question
- Pedal and seatpost lubricants
- Ashtabula bottom bracket pressed cups loosening problem
- 12 function bicycle computer
- I bought this trike (see pics) and want to mod it thusly:
- muc off range of products
- Treatment For Rust Inside Frame?
- Terminology: the term "bottom bracket"
- Wellgo Mg-1 spare axle - other brand ?
- Keep getting stiff link changing chains when installing connecting pin
- Cog spacing: five- versus six-speed
- Super Web Grease?
- Front- and rear derailleur compatibility issues
- Middle Chainring...What side faces out?
- Bridgestone 600 650b conversion
- cone wrench tolerances and hardness, cone flats tolerances
- upgrading the group
- Click..click...click from gront of bike under pressure. Any advice?
- why would a chain skip down during a hard sprint?
- wheel pulling out of drop outs
- Acquired Dura Ace 10mm pitch track hub, cog, and lockring. What do I do with these?
- Removing Stuck Bottom Bracket
- How long to soak cassette in OMS?
- Is my brifter broken?
- Weird issue with Hollowtech II BB
- Tubular to clincher: replace entire wheelset or just rims?
- That ring/spacer behind the cassette, is it essential.
- Internal Cable Ferrule Sunk Inside the Frame :(
- Please help with the part name
- Cracked Frame
- Help needed. I need to replace a 2006 Campy Veloce crankset - square taper,
- rattle can painting options
- chain length ??
- Mixing (Acera) 7-speed and (Deore) 9-speed parts
- Lost Self Extractor cover from my FSA SLK crank
- Where on earth can I get a Shimano shifter lever cover?
- how much fork is too much?
- Scored some Tiagra 9 speed shifters
- Rear Gear broken/Messed up (?)
- Throwing Chain with New Crank
- Lube Shifters?
- sqeaking bb90 Trek 5.3 2011
- safety tips with Hydraulic Brakes - disc brakes
- Ovalised Bottom Bracket?
- Clicking while I coast
- Can I weld this crack in a 631 steel frame?
- Ti Paramount: Is this a carbon fork?
- so just to clarify on shimano chains,,,
- BB30 and Shimano Crank
- Paint Stripper
- 26 x2 v. 1.5 - rim size matters?
- Centeroull adjustments driving me batty !!!!!!! What's the trick?
- not sure what freewheel tool to use
- Skipping chain problem - please help
- 9s chain w/ 10s cogs + 9s spacers
- BMC contact info
- New cassette and chain, now getting vibration
- shortening SRAM chain?
- Periodic Clunk in 7 speed, Shimano, Freehub from early 90s Trek Multitrack 700
- Broken spokes-me?
- Front wheel bearing housing comes apart
- Brake pad and tire...how close it too close?
- rear derailleur issues
- Chain Tension issue on a Giant CRX City (in-hub gears)
- Change chain or wear out drivetrain? Been told both. What to do?
- Chain wear at slightly less than 1/16"... replace?
- I ruined a brand new $135 Acros headset by installing it wrong!
- Adding an internal gear wheel
- Shimano brake lever - do I need ferrule for housing inside lever? Here's why I ask.
- Can I replace a tube without replacing the tire?
- Sram 3 Speed Adjustment
- Frame dent removel?
- Revive 3 Speed hub; how hard to remove /replace
- Crank - slight wobble